The main feature of the model is <br /> horizontal cylinder, twin-screw with a uniaxial symmetrical structure. The barrel of the mixer is U-shaped, and there is a feeding port on the top cover or the upper part of the barrel, and a spray liquid adding device can be installed on it according to the needs of the user. A single-shaft rotor is installed in the cylinder. The rotor is composed of a shaft, a transverse brace and a ribbon.
The bottom of the cylinder is equipped with a pneumatic (manual) flap valve. The arc valve is tightly embedded in the cylinder and is flush with the inner wall of the cylinder. There is no material accumulation and mixed dead angles. The reliable side seal ensures that it can be used frequently. No leakage.
Compared with the continuous ribbon, the disconnected ribbon structure has a larger shear motion on the material, and can cause the material to form more eddies in the flow, which accelerates the mixing speed and improves the uniformity of the mixture.
Jackets can be added to the outside of the mixer barrel to cool or heat the material by injecting cold and hot media into the jacket. Generally, industrial water is used for cooling, and steam or electricity can be used for heating.
The main parameters
3P AC208-415V 50 / 60Hz